ขั้นแรกก็ทดลอง setting ก่อน 1. set ที่ Locale & Text ให้เป็นไทย 2. set ที่ browser ที่ Text encoding โดย ISO-8859-1 ถูก set ไว้แล้ว ทำเสร็จ ทุกอย่างก็เหมือนเดิม
ติ๊ก USB debugging แล้วก็ยังไม่ได้ครับของผมใช้ ePad Zt-180 Android 2.1 ครับ ช่วยแนะนำให้ทีเพราะจนปัญญาแล้วครับ ตอนเรียก adb shell มันแจ้งว่า device not found ลองทั้ง Mac ทั้ง Windows แล้วครับ
1.Install USB Driver to PC - ต่อสาย USB(mini usb) กับ PC มันจะเจอเป็น unknown device ให้ update driver โดย browse ไปที่โฟลเดอร์ USB Drivers - ถ้ายังไม่ได้ ให้ reboot pc ก่อน แล้วลองลงใหม่ 2.Flash Zenithink ZT-180 2.1 Adjust settings for the Burn Tool โดยรัน Burntool_v07.2.exe คลิก settings เพื่อเลือก images ที่จะ burn ตามนี้
Be sure the following file boxes are checked: 1. For uboot-img, use the u-boot.img file; 2. For linux-kernel, use the zImage_1024x600 file (note: there is no good way to tell which tablet resolution you have. If you burn with one size, and it looks strange when you boot up, burn again with the other.) 3.For linux-sys, use the system.img file; 4. For linux-udat, use the userdate.img file; (note: you may leave this unchecked to keep your personal settings and installed apps in place) 5.After you have selected all the appropriate files, click on the bottom left button, this is the "save settings" button. The window will close and you are ready to connect the tablet and burn the new firmware
2.2 Burn the firmware to your tablet Now that the burntool is opened, and the settings are complete. Re-connect your tablet to the computer. *** BE SURE THAT THERE ARE NO MICRO SD CARDS OR USB FLASH DRIVES IN THE TABLET DURING THE BURN PROCESS. **** Press and hold the square button on the face of the tablet while pressing the power button. Then the blue light on the tablet should be on but not the screen. On the burntool, you should see a green box next to Device10. Click on the "start" button to begin the burn process. Again, BE SURE THAT THERE ARE NO MICRO SD CARDS OR USB FLASH DRIVES IN THE TABLET DURING THE BURN PROCESS.
You will see each of the images being burned to the tablet with a progress bar. Don't touch the tablet or computer while the burn is in process.
When the burn process if finished, you will see the "start" and "settings" available again
Now that the process is finished, you can disconnect the usb cable and reset the device. Use a paperclip or pin to hit the reset button. If you don't have a paperclip, you can hold down the power button for 10 seconds to reset the tablet. 2.3 Reboot and Sign In to Google After you burn the new firmware to the tablet, power on the tablet.
ข้อ 1 ที่บอกให้ติดตั้งไฟล์ thaikeyboard ผ่าน sd card ...ติดตั้งนี่ติดตั้งยังไงอ่ะคะ
ตอนนี้วิธีการที่ทำคือก๊อปไฟล์ที่ดาว์นโหลดมาลง sd card ไว้ แล้วเสียบลงในเครื่อง iped จากนั้นก้อเข้าไปใน file browser แล้วคลิ้กที่ตัวไฟล์นั้น...แต่ปรากฏว่ามันฟ้องว่าผิดพลาดน่ะคะ
รบกวนด้วยค่ะ...ยังอ่าน เขียนไทยไม่ได้เลย
ปล. รู้สึกว่าใช่เครื่องรุ่นดียวกันน่ะคะ..ดูจากรูป