กรกฏาคม 2556

 
1
2
3
5
7
8
11
12
13
15
16
17
19
21
22
23
24
25
26
28
29
30
31
 
 
All Blog
หนุ่มมะกันนักท้ามฤตยู “ไต่ลวด” ข้าม “แกรนด์แคนยอน” สำเร็จแล้ว
หนุ่มวัย 34 ปี ผู้ซึ่งเพิ่งเดินไต่ข้ามน้ำตกไนแองการาเมื่อปีที่แล้วได้สวดอ้อนวอนอยู่โดยตลอด ขณะที่เขาเลี้ยงตัวเดินข้ามหุบเหวลึก บนเส้นลวดเหล็กกล้าขนาด 2 นิ้ว ที่ขึงอยู่ในระดับความสูงราว 1,500 ฟุต (457 เมตร) เหนือลำแม่น้ำลิตเติล โคโลราโด

นิค วอลเลนดา หนุ่มอเมริกันนักท้ามฤตยู กลายเป็นคนแรกที่ไต่เส้นลวดข้ามหุบเหวแกรนด์แคนยอนสำเร็จ กระนั้นที่จริงแล้วสถานที่ซึ่งใช้ในการไต่คราวนี้ คือ บริเวณเหนือโตรกผา ลิตเติล โคโลราโด (Little Colorado Gorge) ซึ่งตั้งอยู่ในพื้นที่ อุทยานและสถานนันทนาการชนชาตินาวาโจ ลิตเติล โคโลราโด และอยู่ทางด้านตะวันออกใกล้ๆ กับแกรนด์ แคนยอน ตัวจริง
       ฝ่ายผู้จัดงานนี้กล่าวว่าเขาใช้เวลา 22 นาที 54 วินาทีในการไต่ข้ามช่องหุบเหวเป็นระยะทางราว 1,400 ฟุต (426) เมตร ซึ่งเป็นเวลาที่เร็วกว่าที่คาดการณ์กันเอาไว้ ซึ่งในขณะที่เขาเดินมาจนเหลือระยะทางอีกหลายเมตร เขาก็ชูหัวแม่โป้งให้ผู้ชมก่อนจะกึ่งวิ่งกึ่งเดินจนกระทั่งถึงอีกฟากหนึ่งได้สำเร็จ

       ถึงแม้การเดินท้ามฤตยูคราวนี้ ได้รับการโฆษณาว่าเป็นการไต่ข้าม “แกรนด์ แคนยอน” (Grand Canyon) แต่ที่จริงแล้วสถานที่ซึ่งใช้ในการไต่คราวนี้ คือ บริเวณเหนือโตรกผา ลิตเติล โคโลราโด (Little Colorado Gorge) ซึ่งตั้งอยู่ในพื้นที่ อุทยานและสถานนันทนาการชนชาตินาวาโจ ลิตเติล โคโลราโด และอยู่ทางด้านตะวันออกใกล้ๆ กับแกรนด์ แคนยอน ตัวจริง

       เหตุผลสำคัญประการหนึ่งที่วอลเลนดา ต้องเลือกที่นี่ อาจจะเป็นเพราะทางอุทยานแห่งชาติแกรนด์ แคนยอน ประกาศว่าไม่มีทางอนุญาตให้จัดรายการเช่นนี้ขึ้นในพื้นที่รับผิดชอบของตน เนื่องจากจะเป็นการทำลายความเงียบสงบตามธรรมชาติของอุทยาน อย่างไรก็ตาม การเดินบนเส้นลวดเหนือโตรกผา ลิตเติล โคโลราโด ก็ดูจะมีอันตรายทายท้าความตายเป็นอย่างยิ่งอยู่นั่นเอง อีกทั้งความสำเร็จคราวนี้ก็เป็นการพิสูจน์ให้เห็นอีกครั้งว่า วอลเลนดา คือ “เจ้าแห่งนักไต่เส้นลวด” อย่างแท้จริง

       ทั้งนี้ วอลเลนดาได้วางแผนและเตรียมตัวสำหรับการไต่ลวดครั้งนี้มานานราว 4 ปี โดยได้ย้ายไปอาศัยอยู่ในพื้นที่ห่างไกลในเขตอุทยานและสถานนันทนาการชนชาตินาวาโจดังกล่าวนี้

       เขาได้เริ่มซ้อมครั้งใหญ่ในรัฐฟลอริดาเมื่อหลายอาทิตย์ก่อน โดยฝึกความแข็งแรงด้วยการเดินกลับไปกลับมาบนเส้นลวดที่ยาว 300 เมตรและใช้พัดลมความแรงสูงเพื่อแทนลมธรรมชาติที่มีความเร็ว 80 กิโลเมตรต่อชั่วโมง

       กระนั้นเขาก็พบว่า “ลมแรงกว่าที่ผมคิดไว้” เขาเอ่ยขึ้นขณะเริ่มออกเดินไปได้ประมาณ 6 นาที โดยคำพูดของเขาถูกถ่ายทอดสดผ่านทางโทรทัศน์ช่องดิสคัฟเวอรี ที่ออกอากาศใน 219 ประเทศทั่วโลก

       เขานั่งยองๆ ก่อนที่จะมาถึงครึ่งทาง ซึ่งเขาได้อธิบายว่าเป็นการสร้างความสมดุลให้กับเส้นลวดและตัวของเขาเอง
       “ตอนนั้นลมมันแรงมากจริงๆ”

       ตามร่างกายของวอลเลนดาได้ติดตั้งไมโครโฟนตัวหนึ่งและกล้องถ่ายทอดสดอีกหลายกล้อง รวมไปถึงกล้องตัวหนึ่งที่ติดไว้บริเวณหน้าอกของเขาเพื่อถ่ายภาพหุบเขาลึกที่อยู่เบื้องล่าง ซึ่งระยะทางของความลึกจากเส้นลวดถึงก้นเหวนั้น ยังสูงยิ่งกว่าความสูงของตึกเอ็มไพร์สเตทเสียอีก

       หลังจากที่เขาได้เร่งฝีเท้าเมื่อเหลือระยะทางไม่กี่เมตรสุดท้ายจนข้ามไปอยู่อีกฟากหนึ่งได้สำเร็จแล้ว เขาก็ตกอยู่ในอ้อมกอดของ เอเร็นดีรา ภรรยาและลูกๆ อีก 3 คน “การที่ครอบครัวของผมอยู่ที่นี่ด้วยเป็นสิ่งที่สำคัญมากจริงๆ ผมคงจะทำสิ่งนี้ไม่สำเร็จถ้าหากไม่มีพวกเขาคอยอยู่ให้กำลังใจ” เขากล่าว

       เมื่อถามว่าเป้าหมายชวนหวาดเสียวที่เขาจะไต่ข้ามในครั้งต่อไปคืออะไร เขาตอบว่า “สิ่งที่ผมใฝ่ฝันว่าจะไต่ข้ามเป็นสิ่งต่อไปก็คือ การเดิน (บนเส้นลวด) ระหว่างยอดตึกระฟ้า 2 ตึกในนครนิวยอร์ก”








Create Date : 20 กรกฎาคม 2556
Last Update : 20 กรกฎาคม 2556 19:26:02 น.
Counter : 2359 Pageviews.

2 comments
  

This kit is the perfect choice for all of your video applications. The 504HD offers a perfect balance between design and performance. The bridge design improves the head’s rigidity, and its PAN friction control is fast, simple to fine-tune and protected from knocks. All structural components are made from aluminum, with the PAN axis rotation unit using ball bearings to obtain smooth, totally vibration-free controlled movements that can be directly adjusted using the head’s FDS variable friction system. FDS on both the PAN and TILT axes also ensures that the head works perfectly at all temperatures, with all types of equipment and under all loads. The 504HD has been designed to offer a load capacity of up to 16.3 lb, making it suitable for a huge range of equipment.



The ExpoDisc white balance filter allows digital photographers to quickly and easily set an accurate custom white balance. Each ExpoDisc is individually assembled, calibrated and certified for neutrality in the visible spectrum, and for 18% light transmission. The ExpoDisc can be used on-the-fly to set a white balance in-camera when shooting JPEG, or later in post production when shooting RAW. Using an ExpoDisc to set a custom white balance results in consistently balanced color and eliminates many of the yellow, red and blue color casts commonly seen in digital photography. The ExpoDisc is easy to use. Setting a white balance with the ExpoDisc eliminates many of the inconsistencies and inconveniences associated with using white balance cards and targets, including unwieldy size, unwanted reflectivity, improper angling, and shadows. To set a white balance with an ExpoDisc, simply take a photograph of the light source (incident light) through the ExpoDisc, then follow your camera's instructions to set the camera's custom white balance. Because the ExpoDisc is calibrated for an 18% light transmission, you can also use it as a reference tool for manually determining proper exposure. The ExpoDisc is available in a variety of sizes to fit most popular lenses. The ExpoDisc does not thread into the lens; instead, its quick mount design can be pushed-on and popped-off to facilitate a quick white balance.


โดย: TRD (arekaro ) วันที่: 20 กรกฎาคม 2556 เวลา:19:26:46 น.
  

For sophisticated wireless flash setups, there's nothing like the new Speedlite Transmitter ST-E3-RT*. Facilitating radio controlled, two-way wireless transmission up to 98.4 feet, among up to five groups or fifteen individual Speedlites, the ST-E3-RT represents the next generation in wireless flash systems. With operational controls similar to the new Speedlite 600EX-RT, including diverse flash metering options, and a number of flash modes, the Speedlite Transmitter ST-E3-RT makes complex lighting setups simple. With a compact design and highly reliable construction, combined with a clearly laid-out information panel and buttons with back lighting and more, the Speedlite Transmitter ST-E3-RT is an indispensible tool for advanced, professional flash photography.



The XB-DJI Will Fit 9" Props: •1 DJI Phantom® with GoPro® Hero 3 (or 2) attached . Will accommodate 9" props attached. •1 FatShark FPV Goggle •1 Phantom® Charger •6 Phantom® Batteries •1 Phantom® Radio *Foam cavity is adjustable, fitting most compatible radios •4 Spare Props up to and including 9" props •4 Spare Motors •4 AAA batteries •Misc Cables GoPro Equipment: •1 Additional GoPro Hero® 2 or 3 Camera •2 GoPro Hero® Batteries •2 BacPacs •2 Deep Back Doors •1 Wall Charger •1 Auto Charger •2 SD Cards Specifications: Exterior Dimensions: 20.25" x 16.93" x 8.78" Weight: 13.15 lbs Designed for use with DJI Phantom® and GoPro® Camera. DJI Phantom® is a registered trademark of DJI Innovations in the United States and other countries. GoPro® is a registered tradeark of Woodman Labs, Inc. DJI Phantom®, GoPro® Camera & Accessories Not Included With Cases.


โดย: TRD (arekaro ) วันที่: 20 กรกฎาคม 2556 เวลา:19:27:02 น.
ชื่อ : * blog นี้ comment ได้เฉพาะสมาชิก
Comment :
 *ส่วน comment ไม่สามารถใช้ javascript และ style sheet
 

arekaro
Location :
  

[ดู Profile ทั้งหมด]
 ฝากข้อความหลังไมค์
 Rss Feed
 Smember
 ผู้ติดตามบล็อก : 1 คน [?]