วิธีใส่ thermal compound ใน CPU cooler แบบใหนให้ผลดี
วิธีใส่ thermal compound ใน CPU cooler แบบใหนให้ผลดี
Credit website..
//www.hardwaresecrets.com/article/What-is-the-Best-Way-to-Apply-Thermal-Grease-Part-2/1392
******
Conclusions
We concluded at the end of our first article on this subject that Putting a small drop of thermal compound at the center of the CPU is the best way to apply thermal compound.
The tests we made this time corroborate this conclusion with one small adjustment. On a cooler with a mirror-like, perfectly flat base surface, less is more, i.e., applying less thermal compound than the ideal is not a big problem. However, if the base of your cooler is not smooth because of the gaps and irregularities typically found on coolers where the heatpipes touch the CPU directly, you will need a little more thermal grease.
The worst result we achieved was when we didnt apply enough thermal compound to cover the entire CPU surface after the installation of the cooler.
On the other hand, the best cooling performance was measured when we used a small drop of thermal compound in the center of the cooler base. (It should be at the center of the CPU, and the result should be the same.) This means that, when using a CPU cooler where the heatpipes touch the CPU directly, you will not need to use a special procedure to apply the thermal compound, such as applying a stripe of grease at each heatpipe.
You will need to apply only a drop of thermal compound at the center of your CPU. If you want to be sure that it was enough for best performance, remove the cooler and check if the grease spread correctly. If not, just apply a little more.
*******************
อ่านการผลการทดสอบ Thermal Compound ยี่ห้อต่าง ๆ กัน
//www.hardwaresecrets.com/article/Thermal-Compound-Roundup-October-2011/1396/5
| Create Date : 30 กันยายน 2554 |
| Last Update : 29 มกราคม 2555 20:23:12 น. |
|
0 comments
|
| Counter : 1668 Pageviews. |
 |
|
|
|
|
ฝากข้อความหลังไมค์
Rss Feed
ผู้ติดตามบล็อก : 142 คน [